Cruise Control Vacuum Control Circuit Low
P0583 indicates the cruise control vacuum control circuit is detecting a low voltage or signal condition. This fault prevents the cruise control system from maintaining proper vacuum pressure to regulate vehicle speed, causing the cruise control to become inoperative or unreliable.
What You Might Notice
- Cruise control completely inoperative or non-functional
- Check engine light (CEL) illuminated
- Cruise control set/resume/accelerate functions not responding
- Vehicle speed fluctuates erratically even with cruise engaged
- Cruise control indicator light remains on permanently
Most Common Causes
- 1
Faulty cruise control vacuum solenoid
The vacuum solenoid that controls vacuum flow to the cruise control servo has failed or is not receiving proper electrical signal, causing low circuit voltage.
- 2
Wiring or connector issues
Corroded, damaged, or loose wiring and connectors in the cruise control vacuum circuit can cause poor electrical contact and low voltage conditions.
- 3
Cruise control servo malfunction
The cruise control servo unit itself may be faulty or unable to respond to vacuum input, triggering a low circuit signal from the ECU.
- 4
ECU or module control issue
The engine control unit or cruise control module may have internal faults preventing proper voltage output to the vacuum control circuit.
How to Diagnose It
- 1
Check Faulty cruise control vacuum solenoid — The vacuum solenoid that controls vacuum flow to the cruise control servo has failed or is not receiving proper electrical signal, causing low circuit voltage.
- 2
Check Wiring or connector issues — Corroded, damaged, or loose wiring and connectors in the cruise control vacuum circuit can cause poor electrical contact and low voltage conditions.
- 3
Check Cruise control servo malfunction — The cruise control servo unit itself may be faulty or unable to respond to vacuum input, triggering a low circuit signal from the ECU.
- 4
Check ECU or module control issue — The engine control unit or cruise control module may have internal faults preventing proper voltage output to the vacuum control circuit.
How to Fix It
- 1
Test and replace vacuum solenoid
Locate the cruise control vacuum solenoid, test it for proper electrical resistance and voltage supply. If faulty, replace with a new OEM or equivalent solenoid.
- 2
Inspect and repair wiring and connectors
Inspect all wiring and connectors in the cruise control circuit for corrosion, damage, or loose connections. Clean corroded contacts and reseat connectors, or replace damaged wiring harnesses.
- 3
Test cruise control servo operation
Test the cruise control servo for proper vacuum response and electrical signal output. If unresponsive, replace the servo unit.
- 4
Scan for related codes and module diagnostics
Perform comprehensive module diagnostics to rule out ECU or cruise control module faults. If module is faulty, reprogram or replace as needed.
Need a deeper diagnosis?
Search for related repair guides or browse by system.