P05FF ISO/SAE Reserved
This code is marked as ISO/SAE reserved, so it is not used as a normal production trouble code definition. If it appears on a scan tool, verify the code list, module software, and scan-tool accuracy before replacing any parts.
What You Might Notice
- Stored code on scan tool
- No reliable drivability pattern
- Possible communication or software issue
- Other diagnostic codes may also be present
- Further verification needed before diagnosis
Most Common Causes
- 1
Scan tool definition mismatch
- 2
Module software issue
- 3
Communication fault between modules
- 4
Incorrect vehicle profile in the scan tool
- 5
Code list not applicable to the vehicle
How to Diagnose It
- 1
Check Scan tool definition mismatch — Inspect for signs of failure and test before replacing.
- 2
Check Module software issue — Inspect for signs of failure and test before replacing.
- 3
Check Communication fault between modules — Inspect for signs of failure and test before replacing.
- 4
Check Incorrect vehicle profile in the scan tool — Inspect for signs of failure and test before replacing.
- 5
Check Code list not applicable to the vehicle — Inspect for signs of failure and test before replacing.
How to Fix It
- 1
Verify the code definition in service information
- 2
Confirm the scan tool is set to the correct vehicle
- 3
Check for module software updates
- 4
Do not replace parts based on this code alone
- 5
Clear the code and rescan after any communication/software repairs
Need a deeper diagnosis?
Search for related repair guides or browse by system.